Grillo Model G85

As in the American 4-wheel tractor market, implements to fit European 2-wheel tractors are sometimes not made by the tractor manufacturer, but by independent implement manufacturers. The implement selection we offer for the Grillo Walk-behind tractors has been chosen based on High Quality, functionality and good design.

2 WORKING SPEEDS FWD & REV., 1 TRANSPORT SPEED, ADJUSTABLE & REVERSIBLE ANTI-VIBRATED HANDLEBARS
DESCRIPTION RETAIL
CH270 KOHLER, RECOIL, 4X8 FIXED WHEELS $1,699.00
MZ250 YAMAHA RECOIL, 4X8 FIXED WHEELS $1,829.00
EX27 SUBARU/ROBIN, RECOIL, 4x10x18” FIXED WHEELS $2,029.00
GX270 HONDA, RECOIL, 4x10x18” FIXED WHEELS $2,129.00
GX270 HONDA, ELECTRIC START, 4x10x18” FIXED WHEELS $2,429.00

Specifications
Engine Options 7hp Kohler, 8hp Yamaha, 9hp Subaru-Robin or 9hp Honda
Electronic Start Option On 9hp Honda
Clutch Serviceable, automotive type
Wheel Speeds MPH 1st: .75 Fwd & Rev.; 2nd: 1.6 F & R; 3rd: 7.5 Fwd (Rear-PTO only)
Reverse Type Positive Geared engagement, control on handles
Standard Wheels 4x8x16" Fixed track (7 & 8 hp); 4x10x18" Fixed track (9 hp)
Differential None
Steering Breaks None
Bumper Standard w/skid plate
PTO Type Independent, shaft drive 965 RPM
PTO/FLANGE Coupling 2-12mm threaded studs & nuts OR optional quick coupling
Handlebars Reversible, adjustable, Off-settable, antivibrated

Implements For G85
ITEMS DESCRIPTION RETAIL NOTE (see bottom)
984511 22” ADJUSTABLE ROTARY TILLER (7 hp & up) $560.00
984611 27” ADJUSTABLE ROTARY TILLER (9hp gas/8hp diesel & up) $625.00
MT-50-G 20” POWER HARROW with mesh roller (9HP min.) $1,899.00 @@, ***
MTL-60-G 24” POWER HARROW with mesh roller (10HP min.) $2,069.00 @@, ***
MTE75 30” POWER HARROW with mesh roller (Specify if for G107 or G110) $2,449.00 ***
ARD4G85 ROTARY PLOW(single version-RH discharge-9hp gas/8hp dies.) $1,399.00 **
ARVD4-G ROTARY PLOW(reversible-discharge version-9hp gas/8hp dies.) $1,989.00 **, @@
BM-21G 21” BRUSH MOWER (G85-G107) $999.00 ***
BM-26G 26” BRUSH MOWER (G85-G107, 8hp & up) $1,069.00 ***
MDS-700-G 28” SUPER-DUTY BRUSH MOWER to fit G110 $1,349.00 #
MDS-800-G 32” SUPER-DUTY BRUSH MOWER to fit G110 $1,449.00 #
MTP-500-GR 20” FLAIL MOWER (6hp & up)(req. female Quick coupling) $1,599.00
SHARK65-G 26” FLAIL MOWER (To fit G85d/G107)(Req. Fem. Qk Cplg) $1,699.00
SHARK65-G1 26” FLAIL MOWER (To fit G110) $1,699.00 #
SHARK85-G1 34” FLAIL MOWER (To fit G110) $1,999.00 #
ZRA800G 33” Hi-Capacity Lawn Mower w. side discharge (G107 & 110) $1,549.00
ZRA1000G110 40” Hi-Capacity Lawn Mower w. side discharge (G110 only) $1,749.00
ET AER 42 42” LAWN AERATOR (REQUIRES tow coupler for approp. Tractor) $339.00 ^
998111-30 30” CUTTER BAR- Single-action, Grease Gearbox $899.00 @
998111-39 39” CUTTER BAR- Single-action, Grease Gearbox $949.00 @
998111-45 45” CUTTER BAR- Single-action, Grease Gearbox $999.00 @
90980-O 45” CUTTER BAR- Single-action, Oil Bath Gearbox $1,354.00 * *
998111-53 53” CUTTER BAR- Single-action, Grease Gearbox (8 hp & up) $1,049.00
90981-O 53” CUTTER BAR- Single-action, Oil Bath Gearbox (8hp & up) $1,444.00 * *
9L6911 46” CUTTER BAR- Double-action, grease gearbox (7.5hp & up) $1,149.00
90883-O 47” CUTTER BAR- Double-action, Oil bath gearbox (8hp & up) $2,048.00 * *
90879-O 59” CUTTER BAR- Double-action, Oil bath gearbox(10hp & up) $2,248.00 * *
SW10-G 40” POWER SWEEPER (adjustable angle, 7.5hp & up) $1,649.00
ET5500G ELECTRICAL GENERATOR 5500 Watt Max. $1,029.00
MM26 HYDRAULIC LOG SPLITTER - 25 ton, 25” cap. (7.5hp & up) $1,749.00 * *
ETPB-GR POWER-BARROW, 4 CU.FT./ 300LB.CAPACITY $699.00
MT500-G8 DUMP TRAILER w. brakes & seat, 16 CU. FT./ 1000 lb. capacity $1,199.00
90735 36” DOZER/SCRAPER BLADE (reversible - for dirt/gravel) $499.00 ^^
ET0172 BOX SCRAPER END KIT FOR ABOVE BLADE $80.00
ET0170 “LEVELLER PLATE” for use with above blade and 12” rim tires $35.00
LNM-90 36” “ECONOMY” SNOW / DOZER BLADE $299.00 ^^@
9E6411 40” SNOW BLADE (requires female quick coupling) $575.00 ^^@
9E6511 48” SNOW BLADE(req. fem. quick. coupl., 9hp gas/8hp dsl. min) $600.00 ^^@
BIO-80G CHIPPER/SHREDDER-Small (up to 2.5” limbs) $1,149.00
BIO-100G CHIPPER/SHREDDER– Medium (up to 3” limbs; 8hp & up) $1,629.00
BIO-150G CHIPPER/SHREDDER– Large (up to 3.5” limbs; G110 only) $1,949.00 #
BIO-90-G HIGH-SPEED BRUSH CHIPPER—Up to 2.5 limbs,G110 only $1,749.00 #
STUMP-G STUMP GRINDER to fit G110 (available to fit G131 by request) $1,499.00
160RM50 20” Single-Stage, Side-driven Snowblower (6hp) $899.00 @
160RM60 24” Single-Stage, Side-driven Snowblower (8hp & up) $959.00 @
160RM70 28” Single-Stage, Side-driven Snowblower(9+hp Gas, 8+hp dies.) $1,029.00 @
160RM80 32” Single-Stage, Side-driven Snowblower (G110 ONLY) $1,299.00 #
SP70D3-G 28” TWO-STAGE SNOWBLOWER (9hp gas/8hp diesel & up) $1,849.00
SP85D3-G1 33” TWO-STAGE SNOWBLOWER (G110 only) $2,099.00
ALL ITEMS BELOW WITH THE ITEM NUMBER LISTED IN RED REQUIRE A TOOL CARRIER (the assembly that allows the “attack angle” of the implement to be adjusted in relation to the tractor plane) AND A DRAWBAR (the link between the Tool Carrier and the actual tractor). SINCE THESE ARE SOLD SEPARATELY, A CUSTOMER ONLY NEEDS TO PURCHASE ONE OF A DRAWBAR & TOOL CARRIER TO OPERATE MULTIPLE OF THESE RED-LISTED IMPLEMENTS . (For example, a customer might first purchase a Root/Potato digger plow, with the appropriate Tool Carrier & Drawbar. Then in the future, if that customer wants to purchase a Cultivator, they do not need to purchase another Tool Carrier & Drawbar; they just use their existing one.). TOOL CARRIERS & DRAWBARS LISTED DIRECTLY BELOW.
ITEMS DESCRIPTION RETAIL NOTE
(see bottom)
AT-30-ET TOOL CARRIER FOR AP-5, CULTIVATORS, BEDSHAPER $85.00 +
AT-30 TOOL CARRIER FOR MOLDBOARD PLOWS $85.00 +
BP-80-BOLT DRAWBAR FOR BOLT-ON PTO MOUNT $40.00 +
BP-80-GQH-5 DRAWBAR FOR G85/107 QUICK-COUPLING $60.00
BP-80-G110 DRAWBAR FOR G110 QUICK-COUPLING $60.00
ET-3 3-SHANK Cultivator (22” frame, 2 curved & 1 straight shank) $195.00 ^***
ET-5 5-SHANK Cultivator (35” frame, 3 curved & 2 strt shanks, 8HP & UP) $270.00 ^*** +
ET-6 6-SHANK Cultivator(39” FRAME, 3 curved & 3 strt shanks G110 only) $334.00 ^*** +
ETR-5 5-SHANK Cultivator, Adjustable frame -12”-24”, all strt shanks(8hp & up) $324.00 ^*** +
ACET-5 EXTRA “CURVED” SHANK FOR ABOVE CULTIVATORS $18.00 +
ADET-5 EXTRA “CURVED” SHANK FOR ABOVE CULTIVATORS $18.00 +
STET-5 EXTRA “CLAMP” FOR ABOVE CULTIVATORS $18.00 +
VOET-5 EXTRA REVERSIBLE “CHISEL” FOR ABOVE CULTIVATORS $9.00 +
AS-25-D MINI-BEDSHAPER w. disk hillers & drag chain, 32” MAX bed width $389.00 ^^*** +
AP-5 ROOT / POTATO DIGGER PLOW (req. min. 18” wheels, 8hp) $150.00 ^^*** +
MD-06 SINGLE MOLDBOARD PLOW, 8” (min. 20” wheels) $174.00 ^^
V180-06 Moldboard Plow, 8”, 180 degree “swivel” type (min. 20” wheels) $300.00 ^^
NOTES: * = REQUIRES PTO ADAPTER
** = MAY REQUIRE 5” AXLE EXTENSIONS
*** =Requires 20” tall wheels minimum. (Larger wheels OK too)
^ =WHEELWEIGHTS: ^ RECOMMENDED / ^^ REQUIRED
@= May require PTO extension/s for proper balance
@@= Requires engine front-weight for proper balance
# = Equipped with built-in male Quick Coupling for G110
+ ALSO FITS G131 TRACTOR / IMPLEMENT

Accessories For G85
ITEMS DESCRIPTION RETAIL NOTE
(see bottom)
AR-2-G HILLER / FURROWER (attaches behind tiller) $99.00 +
ET-TLRDP-G TILLER DEPTH CONRTOL WHEEL FOR SHALLOW TILLAGE(0-2”) $50.00
937112 AXLE EXTENSIONS (pair, 5” total extension) $45.00 +
ET0080 AXLE EXTENSIONS (pair, 8” total extension) $80.00
ET0090 AXLE EXTENSIONS (pair, 12” total extension) $85.00 +
ET0100 AXLE EXTENSIONS (pair, 16” total extension) $90.00 +
937312 Adjustable Axle extensions (8—18” total) (Note: will not work with Barbell Weight Hangers) $239.00 +
954712KT QUICK COUPLING KIT for G85/G85D/G107 (1 female, 2 male) $180.00
954812 QUICK COUPLING MALE to fit above kit (for implements) $65.00
ET 0010 QUICK COUPLING MALE “BLANK” to fit above kit (for non-PTO-driven tools) $40.00
954712 QUICK COUPLING FEMALE for G85/G85D/G107 $60.00
946911KT QUICK COUPLING KIT for G110 (1 female, 2 male) $240.00
946511 QUICK COUPLING MALE to fit implements, for G110 $89.00
946911 QUICK COUPLING FEMALE for G110 tractor ( FREE with tractor purchase) $79.00
946711 Adapter to mount 40 & 48” Snow blades to G110 quick-coupling $49.00
946311 “Direct Coupler” adapter to mount G85/107 implements to G110 —requires one per implement (Use these only if customer is NOT purchasing quick-couplings for G110) $20.00
9C7012 TILLER TRANSPORT WHEEL $38.00 +
9G1212 “FACTORY” CAST IRON WHEEL WEIGHTS (pair, 45 lbs total) $185.00
ETBWG “BARBELL” WEIGHT ADAPTORS (PAIR) (7” or 10” LENGTH) $70.00
ETPBWTKT Weight kit for PowerBarrow to counter-balance heavy engines $48.00
9C1512 3” PTO EXTENSION $70.00
90832 PTO ADAPTER $69.00
9F4212 Tow Coupler (for AERATOR and other home-made adaptions for carts, etc.) $60.00
900112 4 X 8 X 16” FIXED RIM WHEELS & TIRES (PAIR) $159.00
900312 4 X 10 X 18” FIXED RIM WHEELS & TIRES (PAIR) $219.00
902412 4 X 10 X 18” Adjustable track width wheels & tires (pair) $289.00
900412 5 X 10 X 20” Adjustable track width wheels & tires (pair) $319.00
902512 5 X 12 X 22” Adjustable track width wheels & tires (pair) $395.00
901212 6.5/80 X 12 X 23” Adjustable track width wheels & tires (pair) $449.00 +
913212 10 X 8 X 20” HI-FLOATATION WIDE TRACTOR WHEELS (pair) $389.00 +
911712 10 X 8 X 19” HI-FLOATATION “TURF” TIRES $349.00
920312 18” STEEL CAGE WHEELS (PAIR) $200.00
929112 TILLER EXPANSION KIT #1 (makes 22” into 27”) $95.00
ET2730 TILLER EXPANSION KIT #2 (makes 27” into 30”) $95.00
ET2730 TILLER EXPANSION KIT #2 (makes 27” into 30”) $95.00
6927358H DEBRIS SCREEN (for cooling air intake-GX340 & 390 Honda) $69.00
6927358D-K DEBRIS SCREEN (for cooling air intake- Diesel) $79.00
4WAY ‘4-WAY’ WEDGE FOR WOOD SPLITTER $75.00 +
GR FRTWT “Suitcase” style front (engine) weight for Grillo GAS tractors–25 LBS $65.00 +
GR ADDLWT ADDITIONAL WEIGHT PLATE FOR ABOVE (25 LBS.) $42.00 +
Important: Prices do not included applicable taxes for your state, also the prices do not include shipping which can very depending on model and attachments